Freth's Recumbents

Main tube with head tube clamped in the jig. The drill thing is what I used to drill the hole for the head tube. White u-strip will be welde...

The main tube has been shortened, I marked the centerline of the sides of the tube, marked the head tube points, center-punched them, used a...

I've built one of these before.  This was made with a muffler pipe and a Huffy Mtn bike (the Huffy front forks became the rear f...

The DeltaWolf trike had the the single speed front ... 38 teeth which came off his sister's bike. But there were all kinds of problems c...

The Mach2 doesn't really look much different from last time ... Still waiting on cables ... Having ridden it several times ... I made so...

At this point I finally put a chain on the Mach2. There's also a skate-wheel idler roller (red) to keep the return chain from flopping...

The blocks are mounted on the jig. The tubing lays in the center of the blocks and is clamped by screwing down the top half. I've lifted...