Base All Welded

After walking the dogs this morning, I went into the shop and welded up all connections and then used the 4-1/2" grinder to smooth them off.

 

Welded and ground smooth (well, sorta)

 

I leaned it up against the door so you can see the cargo box bottom attached to the pivot unit.

 

A closer view of the pivot unit - you can see the chainring and plate welded together and two 1/4" bolts attaching the cargobox bottom to the pivot unit.

 

Here it is, back clamped in the vise.

 

A side view across the cargobox bottom.

Next up are those outside pieces to hold the wheels ...

and then the vertical corners.