Mach3 - Change the Front Wheel

I changed the front wheel to a 24" one (had to cut the brakes assembly off to do this and patch the fork and grind things smooth again) ... and rode it around.  Pretty nice.  Then I changed it to a 26" wheel (the brake assembly was still off).  It rides pretty good and is the same size as the rear wheel.  Which means you can theoretically make it from just one donor bike.

sideview with the 26" wheel

Brakes removed

sideview of the front fork

Wheel clearance of front fork ...

too close for caliper brakes,

awkward even with "V" brakes

Another view of fork clearance

This view shows the roller for the return chain.

It keeps the chain from swinging back and forth and wreaking havoc.  I had to drop it down a little so that the chain didn't rub the bottom of the frame when on the big gear in the back and the big gear in the front at the same time.

Blue Mach2 with Rack

Okay ... I like how it rides so far.  However, I had no way of carrying anything with me.  So, I added a water bottle holder on the steering tube.  Then I custom made a rack for the back from an oven rack.  And attached a refrigerator basket to it with cable ties.  Also put some clip-on pedals  on it.  I think I may change the front wheel to a 24" one ... which will give my pedals more ground clearance. (meaning I won't occasionally scrub my heels on the ground)

The custom rack made from the oven rack

basket attached to rack with cable ties

side-view of the whole bike